-
RoTOOL
multistage turbine vacuum systems are used for dust collection, dustless sanding,
dustless grinding, shop, vehicle and machine cleanup, and removing all
kinds of scrap, dust, and contamination.
-
-
RoTOOL
dustless sanding systems are used in autobody shops, wood working
shops, solid counter-top manufacturing, fiberglass manufacturing and
repair. Typical dustless grinding applications include concrete
construction, welding and machine shops, dental labs, dentist's
offices, etc.
-
-
RoTOOL Vacuum Systems
are used for cleanup of glass, dirt, food, saw dust and similar
materials. RoTOOL vacuum systems can be used for cleanup when
contamination cannot be allowed in the air, as in food processing
plants.
-
RoTOOL's
unique two-stage, reverse air purge, self-cleaning filter is designed
and manufactured by RoTOOL in the United States. The first stage is a
true centrifugal separator where the air is spun 6 to 7 times and 99%
of the dust is removed from the air stream. This stage works so well,
our filters will not load up for weeks, if not cleaned. In the second
stage, the pleated filters are self cleaning with reverse air purge.
Our filters are cleaned at night when the system is off. This method
works better than trying to clean the filters during operation.
RoTOOL's filters use only a few cubic feet of air per week and last 5
to 10 years. Our filters remove dust particles to 1/2 micron so you can
route the air back to your shop.
-
-
RoTOOL
manufactures multistage turbines for dustless sanding, detailing autos,
and vacuuming the shop and offices with 106 water column inches of
suction (7.8 inches of mecury suction). We only use totally enclosed,
cast housing, fan cooled American motors. Our turbines are of the four
bearing design which is a much stronger design and easier to repair.
RoTOOL turbines can be operated 24 hours per day.
|
